Contractor Payment Failed or Stuck: Why It Happens and What to Do Instead

Article

An international contractor payment can fail or stall for a handful of reasons, and the right fix depends on which one you’re dealing with. Most cases come down to recipient details that don’t match, a compliance or security check, a limit, a contractor’s country or account that your service doesn’t support, or a delay at an intermediary bank. If you can’t pay an overseas contractor, start with the status, then the reason, then act. Below you’ll find how to tell the causes apart, a checklist for the first hour, and what to do when your usual payment method isn’t available for a contractor.

Quick Diagnosis: What You See and What It Usually Means

  • Payment returned or rejected. Most likely cause: wrong recipient details, a name that doesn’t match the bank’s records, or a recipient account that can’t receive funds. First move: ask the sender’s bank or payment service for the return reason, then confirm the details with the contractor.
  • Payment returned even though the details are correct. Most likely cause: the contractor’s account may not be able to receive that currency, or the contractor’s country or withdrawal method isn’t supported. First move: ask the contractor to confirm with their own bank that the account can receive the currency you’re sending.
  • Payment “pending” or “on hold” for days. Most likely cause: a compliance or security check, or a bank requesting more details. First move: answer any information request promptly.
  • You can’t send the payment at all. Most likely cause: a limit, or a country, currency, or withdrawal method your service doesn’t support. First move: check the service’s supported countries, currencies, and limits.
  • Money left your account but hasn’t arrived. Most likely cause: processing at an intermediary or receiving bank. First move: ask your bank to trace the payment with its UETR.

Why a Contractor Payment Fails or Gets Stuck

There’s no single cause. These are the most likely reasons a payment gets rejected, returned, or held.

Wrong or mismatched details. One wrong digit in an IBAN, or a name that differs from the one on the account, is enough for a rejection. Don’t count on the sending bank to catch it: it may not be able to verify the beneficiary’s account details.

A compliance or security check. Banks involved in a transfer, including intermediary and beneficiary banks, may request more details before a payment can be processed. Regulatory or security checks can also make a transfer take longer. Which details are needed is up to the bank.

The contractor’s side isn’t supported. Sometimes nothing is wrong with the payment itself: the contractor’s side can’t take it. That can happen in three ways.

  • Your service doesn’t cover the contractor’s country, currency, or withdrawal method. Banks and payment services publish their own lists of supported countries, currencies, and withdrawal methods, and coverage differs from country to country. A service can work for one contractor and not for another.
  • The contractor’s account can’t receive the currency you’re sending. The account needs to be able to receive the selected currency before the payment goes out. A closed or frozen account, or one that can’t receive funds for another reason, can be rejected, and the receiving bank makes the final decision on whether to accept the money.
  • The contractor has no suitable way to receive the funds. For example, they don’t have an international bank account, or the withdrawal methods available in their country don’t match what your service offers.

A coverage gap on your side often shows up before you send: the country, currency, or method isn’t available. A gap on the contractor’s side often shows up after: the payment goes out and comes back.

A limit. Banks and payment services set their own limits, so check yours before you send a large amount.

A delay along the way. Delays can happen while a transfer is still being processed by intermediary or receiving banks. Cut‑off times, weekends, and holidays add to them, and timelines vary by bank.

What to Do Right Now: A Checklist

  1. Get the status and the reason. Ask the bank or payment service that sent the payment whether it’s returned, held, or still in transit, and why. If it came back, ask whether the bank can share the return reason code: it shows whether the problem is the account, the name, or a regulatory check. Don’t guess.
  2. Check the details against the contractor’s own records. Compare the account number or IBAN, the SWIFT/BIC, and the exact name on the account. Also ask the contractor to confirm with their own bank that the account can receive the currency you’re sending.
  3. Answer information requests promptly. If a bank asks for more details, find out exactly what it needs. A good habit is to keep the signed contract and the invoice for the payment within reach, because they document what the payment is for.
  4. Trace a payment that left but hasn’t arrived. Ask your bank whether it can give you the payment’s UETR, a 36‑character reference carried by Swift payment instruction messages, which any party in the payment chain can use to find the payment. According to Swift’s explanation of the UETR, the free basic tracker is offered to financial institutions, so your bank is the one to run the lookup.
  5. Hold off on sending it again. Until you know where the first payment is, a second one can leave you paying twice. If the payment is stuck, ask your bank whether it can be recalled.
  6. Expect the amount to differ if it comes back. A returned transfer may be converted again at the prevailing rate, intermediary bank fees may be deducted along the way, and the transfer fee may not be refunded.

If Your Usual Payment Method Isn’t Available

Sometimes the payment itself is fine and the problem is the method: your service doesn’t cover the contractor’s country, currency, or withdrawal method, or the contractor doesn’t have an international bank account.

One rule first. If a bank or payment service stopped a payment after a compliance check, wait until it explains the reason and either completes the payment or returns the money. Don’t send the same payment another way in the meantime.

Then work through it:

  1. Ask the contractor which withdrawal methods are available in their country. Options differ by country: a local bank account, a card, an e‑wallet.
  2. Check coverage. Country, currency, and withdrawal method are three separate questions, and any one of them can be the blocker.
  3. Ask your bank or service whether it supports that country and method. If it doesn’t, retrying the payment won’t change the result. Decide how you’ll pay this contractor before the next payment date.
  4. Check local rules. Before you switch to any withdrawal method, check what applies in the contractor’s country.

How to Stop It Happening Again

  • Verify details at onboarding, not on payday. Collect the name exactly as it appears on the bank account, the account number or IBAN, and the SWIFT/BIC, and read them back to the contractor.
  • Keep a contract, an invoice, and a payment confirmation on file for every payment. A bank’s request for details is then quick to answer.
  • Pay ahead of deadlines. Cut‑off times, weekends, and holidays add days.
  • Check country, currency, and limits before the first payment. Not after the first failure.

How Mellow Solves This

If a payment failed because the contractor’s country isn’t supported by your current service, or for another reason listed above, Mellow can help reduce the chance that the next payment fails.

Contractors in 100+ countries. Mellow works with contractors in 100+ countries, including countries with limited payment access. With coverage this wide, the chance that a payment goes through is high. One agreement covers all of them.

Payments are only part of it. Mellow also takes on the contract side. Your company signs one contract with Mellow, including transfer of rights to the work and an NDA, and Mellow signs agreements directly with each of your contractors. Closing documents are prepared every month, for your company and for your contractors.

Proactive live support for you and your contractors. Mellow keeps track of changes at the payment partners it works with and notifies you in advance if anything changes, so errors are kept to a minimum.

Also included:

  • Payment after you accept the work. The contractor completes the task, you accept it, and then the payment goes out.
  • AML/KYC identity verification. Part of how contractors join.
Back to articles