
How to Pay International Contractors: Banks, Services, and Platforms
A company can pay an international contractor through a bank, a transfer service, a contractor platform, or a provider that signs the contract with the contractor itself. The right choice depends on two questions: how the money moves, and who is the party to the contract. This guide shows how to pay international contractors in each case, what a payment costs, and which paperwork you need.
At a glance:
- Bank transfer. Your bank sends the money. Fees come from your bank and often from other banks on the way, and the exchange rate can include a markup. Banks quote 1‑5 business days, sometimes longer. You are the party to the contract.
- Money transfer service. A service sends the money, often in batches. Fees, limits, and checks depend on the service. You are the party to the contract.
- Contractor management platform. One system for contracts, invoices, and payments, usually for a monthly fee per contractor. You are still the party to each contract.
- “Of record” service. The provider signs the contract with each contractor, and you sign one agreement with the provider. How much liability the provider takes on is set in its terms.
How the Money Moves
Banks and transfer services answer one question: how does the money get from you to the contractor? They do not change who the contract is with.
Bank Transfer
A wire from your business account is the most familiar way to pay foreign contractors. You send it with the contractor’s bank details, usually a SWIFT/BIC code and an IBAN or account number. Wells Fargo notes that some countries also require a purpose of payment.
A wire does not always go straight from your bank to theirs. SWIFT’s 2018 white paper “SWIFT gpi: Towards frictionless cross‑border payments” describes a chain of originating and beneficiary banks and one or more correspondent banks, and says that inefficiencies in the chain can drive up the time and cost of a payment.
What works well. Most business banks offer wires, and your accountant gets a clear record of each payment. The contractor only needs a bank account.
What gets expensive or slow. Costs come from several places. Wells Fargo, for example, lists $30 for an online international wire sent in US dollars from a non‑analyzed business account and $25 for an analyzed one (fee schedule effective September 2026). It adds that other banks may charge fees on top, and that its exchange rate includes a markup.
Banks usually let you choose who pays the fees. With OUR, the sender pays the charges. With SHA, the sender pays its own bank’s fee and the receiver pays the rest. With BEN, the receiver pays. Ask your bank exactly which fees OUR covers.
Speed varies. Bank of America and Chase quote 1‑5 business days for international wires. Intermediary banks, local holidays, and compliance checks can add time, and Wells Fargo says it may need to contact you to verify a payment, which could delay delivery. A wire can also come back. Wells Fargo says a wire may be returned if the recipient’s bank does not accept it, and that when a returned foreign‑currency wire is converted back to US dollars, the amount credited to you may be lower than the original debit because of exchange rate changes.
The main risk is a wrong detail. Check the name and account details twice. Chase notes that wired funds are irrevocable in most cases.
Money Transfer Services
Services such as Wise, PayPal, and Payoneer move money across borders without a wire from your bank. Here is what each says on its own pages.
- Wise. One batch file (CSV or XLSX) can hold up to 1,000 payments. You pay to the contractor’s bank details, and the contractor does not need a Wise account for that. Wise’s fee percentage varies by currency, and Wise says it never marks up the mid‑market rate. It may verify your business and, for large transfers, ask for documents.
- PayPal. PayPal Payouts pays many recipients at once, but you have to request access. Recipients claim the money in a PayPal or Venmo account, and if they do not claim it within 30 days, it is returned to you. The sender pays a percentage fee with a cap, recipients pay no fee, and PayPal’s conversion rates apply if the currency is converted. Currencies go in separate payment files.
- Payoneer. One batch file can hold up to 1,000 transfers to external bank accounts, and recipients do not need a Payoneer account for that. Payoneer says the available payment methods and currencies vary by recipient location, and that fees vary by payment method, currency, and destination. Its terms let it decline payments and ask for documents about the sender, the recipient, and the source of funds.
What works well. All three support batch payments, which helps when you pay freelancers abroad every month.
Where it gets tricky. Each service has its own limits and checks. PayPal’s User Agreement lets it place risk‑based holds on payments received into an account, generally for up to 21 days and longer in some cases, such as a dispute. The contractor also needs a way to cash out the money.
A transfer service only delivers the payment. The contract with the contractor, and the question of whether that person is really a contractor, usually stay with you.
What an International Payment Costs
A payment has five cost components:
- The fee you pay to send it.
- Fees taken by intermediary or receiving banks, unless you chose to cover them.
- The gap between the rate you get and the mid‑market rate on the day. Wells Fargo says its rate includes a markup, and Wise says it does not mark up the mid‑market rate. Compare offers for the same currency pair on the same day.
- Your team’s time on reconciliation and on payments that fail.
- The provider’s own fee, if you use a platform or an “of record” service. These are covered below, and they usually charge per contractor per month.
In short: total cost = invoice amount + sending fee + bank deductions + exchange rate gap + your team’s time + provider fee, if any.
What Are the Steps to Pay an Overseas Contractor?
- Confirm that this is contractor work and sign a contract. Cover scope, payment terms, currency, and who owns the work.
- If you pay from the US, collect the tax form before the first payment.
- Agree on currency and payout details. Get bank details in the contractor’s name, or the account for the service you chose.
- Pick the method. Compare the options above on cost, speed, and who signs the contract.
- Pay against an invoice. Keep the invoice, the proof that you accepted the work, and the payment confirmation.
- Confirm delivery and reconcile. Check that the contractor received the full amount and match the payment to the invoice for your accounting.
How to Pay International Contractors at Scale
The methods above work while payments are few. Once you pay roughly ten or more contractors, especially in different countries, the payments alone take a large share of your team’s time. Each contractor may need a different currency and a different bank or app, and every payment has to be tracked separately. Closing documents have to be collected every month. And before the first payment, each contractor has to be onboarded and given a contract that fits the country. Every manual transfer is also a chance to send money to the wrong place, and then the payment has to be recalled or returned. As noted above, Chase says wired funds are irrevocable in most cases.
Contractor management platforms and “of record” services exist to take this operational work off your team and to cut the chance of a misdirected payment. They differ in one thing: who signs the contract with the contractor. For a handful of contractors in one or two countries, the methods above are usually enough.
Contractor Management Platforms
With a contractor management platform, the direct contract between you and each contractor stays in place. The platform runs the operations around it. It helps you make the payments, keeps all your contractors in one place, and collects the documents in one place, so you do not open a dozen apps to see who has been paid.
What it does not change: your company is the party to each contract. If a tax authority decides a contractor is really an employee, the liability is yours. In the US, the IRS says you may be held liable for employment taxes for that worker (see the IRS page on independent contractor or employee). You will also still need to create the contracts and check the legal details for each country yourself.
“Of Record” Services: When You Need Them
An “of record” service goes further than operations. The provider becomes the party to the contract with each contractor, so it is more than a payment helper: some providers also take on responsibility and protect you from certain risks, for example by taking on responsibility for compliance and liability for contractor misclassification claims. Whether the provider also handles the transfer of intellectual property rights in its contract with the contractor is a question for its terms.
In this model, you sign one agreement with the provider, and the provider signs with each contractor. You do not work out which currency each contractor needs, where to find the documents later, or how to draft a contract for each country. That cuts your team’s time, and it lets you work with contractors in many countries without building a payment route and a contract for each one.
Teams look at this model when they pay contractors in many countries, when contractors are in places that banks and transfer services reach poorly, when they want one contract instead of dozens, or when they would rather hand off the risk of misclassification and the transfer of rights than manage them. Plus, using such services for contractor operations opens up new hiring markets: you can work with contractors in many countries, including countries with limited payment access.
How Mellow Fits
Mellow’s Contractor of Record service sits in the “of record” category. It takes contractor operations off your team and lets you work with contractors in countries with limited payment access.
Here is what it takes off your team:
- One contract with Mellow. Your company signs one agreement with Mellow, including transfer of rights to the work and an NDA.
- Subcontracts with each contractor. Mellow signs subcontract agreements directly with each of your contractors, so you do not sign dozens of contracts in different countries.
- Protection from misclassification risk and transfer of IP rights to the result of the work.
- Closing documents every month.
- 100+ countries, including countries with limited payment access.
- Payment after you accept the work. The contractor completes the task, you accept it, and the payment goes out.
- Proactive live support for you and your contractors.
If you pay one contractor in one country now and then, paying directly is usually simpler. Mellow makes sense when contracts, documents, and several countries start to take your team’s time. You can get all the details on country coverage and the model on a demo.
