International Contractor Agreement: Key Clauses and a Free Template

Article

An international contractor agreement is a written contract between your company and an independent contractor who lives and works in another country. It typically sets the scope of work, payment, transfer of intellectual property (IP), confidentiality, the contractor’s independent status, termination and the governing law. Rules on IP and contractor status are set by each country, so check any template against the contractor’s country before you sign.

Download the free international independent contractor agreement template (.docx). Adapt it for each country and have a lawyer review it: it is not legal advice.

What an International Contractor Agreement Typically Includes

These clauses need the most attention when the contractor is in another country.

Scope and Statement of Work

Describe the work, deliverables and deadlines in a statement of work (SOW) signed by both sides. Keep the general terms in the main agreement, so each new project needs only a new SOW. In our template: Clause 1.2 and Annex 1.

Acceptance

Set a deadline for the company to accept the result or list what is wrong, and a rule for silence: if the company does not respond in time, the result counts as accepted. This fixes the date when payment falls due and leaves less room for disputes. In our template: Clauses 2.2 and 2.3.

Payment, Currency and Taxes

State the amount, the currency, when the contractor sends an invoice and how many days you have to pay it. Say who pays bank fees and whether the price includes VAT or a similar tax. A US company also needs the right tax form from each contractor: Form W‑9 from a US person, Form W‑8BEN from a foreign individual, Form W‑8BEN‑E from a foreign company. In our template: Clauses 6.1 to 6.7 and Annex 1.

Contractor IP Assignment

The clause should say that the rights to the results pass to your company and that the contractor will sign any further documents needed to register or enforce them. Add a separate license for anything the contractor created before the project and reuses in your work, such as code libraries or design assets. Ask for a waiver of moral rights “to the extent permitted by law”, because some countries do not allow such a waiver. Country rules for this clause are below. In our template: Clauses 3.1 to 3.9.

Independent Contractor Status

Describe how the relationship works in practice: the contractor decides how, where and when to work, uses their own equipment, can take other clients and gets no employee benefits. Write only what is true. If the contractor works fixed hours under your direction, this clause will not help. How you pay is part of the test too (see the IRS factors below), so our template suggests a fixed fee or payment per deliverable and lets the contractor use their own subcontractors. In our template: Clauses 1.5 (Option B) and 1.8.

Governing Law and Disputes

Choose the law that governs the contract and how you will resolve disputes: the courts of a named city or arbitration. Some local rules still apply whatever law you choose (see the section on status below). In our template: Section 12.

Termination and Payment for Work Done

Set a notice period, a period to fix a breach before termination, and what you pay for work started but not finished. In our template: Section 11.

Confidentiality and Personal Data

Define what counts as confidential, how long the obligation lasts after the contract ends and what the contractor returns or deletes at the end. If the contractor handles personal data for you, add data protection terms. In our template: Annex 2 and Section 13.

The template also includes a liability cap, trade restrictions and anti‑corruption terms, and rules on the contractor’s use of AI tools, which companies increasingly add to contractor agreements.

Master Agreement or One‑Off Contract

If you plan to give the same contractor more than one project, sign a master agreement once and add a short SOW for each project. You then agree on payment, IP and confidentiality once instead of for every project. For a single, clearly defined project, a one‑off contract with the scope and price inside is enough.

Two questions come up with both formats:

  • Language. If the contract exists in two languages, say which version prevails, and check whether the contractor’s country has its own language requirements.
  • Replacing an old agreement. Do it in writing, signed by both sides, and state what happens to unpaid amounts and to rights already transferred.

How IP Transfer Differs by Country

The same assignment clause can work in one country and fall short in another. A few examples:

  • United States. A transfer of copyright is valid only in writing, signed by the owner of the rights. Some commissioned works can count as “work made for hire”, which makes your company the author, but only in nine categories listed in the law and with a written agreement signed by both sides. Software is not one of them.
  • United Kingdom. The Copyright, Designs and Patents Act 1988 says an assignment of copyright is not effective unless it is in writing and signed by or on behalf of the assignor. Moral rights can be waived in writing signed by the person giving them up. Put both the assignment and the waiver in the agreement the contractor signs.
  • Germany. Copyright itself cannot be transferred, except by inheritance: the author grants rights of use, according to the German Copyright Act (English translation on the official federal portal). Where the types of use are not named, their scope follows the purpose both parties had in mind. The author is entitled to equitable remuneration, a term that departs from this to the author’s detriment cannot be relied on, and choosing another country’s law does not always remove this rule. List the uses you need, such as modifying, publishing and sublicensing, and ask a German lawyer whether the fee meets the rule.
  • France. The French Intellectual Property Code makes the author’s moral right perpetual, inalienable and imprescriptible. Do not build your rights on a waiver of moral rights there: describe the uses and changes you need and check the wording with a French lawyer.
  • India. An assignment must be in writing and signed by the assignor, under the Copyright Act, 1957. Without a stated period, it is deemed to last five years. Without a stated territory, it is presumed to cover India only. Rights the assignee does not use within a year can return to the author unless the agreement says otherwise. Write the period, the territory and the use terms into the agreement.

If a contractor refuses to assign the rights or to waive moral rights, you can agree on an exclusive license instead and list the uses it covers. For other countries, check the rules with a local lawyer.

Contractor or Employee: Status and Choice of Law

Calling someone a contractor in the agreement is not enough. Each country has its own rules for deciding whether a person is a contractor or an employee, and they look at how you actually work together. In the US, for example, the IRS (the federal tax authority) looks at the entire relationship and at how far the company can direct and control the worker. It groups the evidence into three categories:

  • Behavioral: does the company control what the worker does and how they do it?
  • Financial: does the company control the business side of the work, such as how the worker is paid and whether expenses are reimbursed?
  • Type of relationship: are there written contracts or employee‑type benefits such as a pension plan, insurance or vacation pay, and is the relationship ongoing?

If the relationship looks like employment, local authorities can treat the contractor as an employee, with the taxes, contributions and protections that come with it.

Choosing a governing law does not remove these risks. In the EU, the Rome I Regulation lets parties choose the law of their contract. For employment contracts, though, that choice cannot deprive an employee of the protection of rules that would apply without the choice and cannot be changed by agreement. A court can also apply the overriding mandatory provisions of its own country, whatever law the contract names.

Free International Independent Contractor Agreement Template

Our international independent contractor agreement template is based on the agreement Mellow uses with its own contractors, rewritten as a direct agreement between a company and a contractor. It has three parts:

  • Main agreement: scope, acceptance, IP, warranties, liability, payment, trade restrictions, AI use, termination and governing law
  • Annex 1, Statement of Work: a table for each project with deliverables, acceptance criteria, exceptions to the transfer of rights, pre‑existing IP, use of AI tools and the fee
  • Annex 2, Confidentiality Agreement

Fields to fill in are highlighted in yellow. Optional clauses are shaded in blue: keep or delete them. The governing law is left blank on purpose, because the right choice depends on where your company and the contractor are.

The template does not include rules that a specific country makes mandatory. Use the steps below to adapt it, and have a lawyer review it before you sign.

How to Manage Contractor Agreements Across Countries

  1. Check status. Compare how you plan to work with the contractor against the test in the contractor’s country.
  2. Choose the IP route. Decide between an assignment and an exclusive license, and check whether moral rights can be waived there.
  3. Fill in the details the local law looks for. List the types of use, the period and the territory, even if your own law does not require them.
  4. Check mandatory local rules on payment, language and termination with a local lawyer.
  5. Collect tax documents before the first payment. US companies can find which forms to request in our guide to 1099 and W‑8BEN for foreign contractors.
  6. Sign and store the agreement. Rules on electronic signatures differ by country: check which form of signature works for an IP assignment in the contractor’s country. Keep the signed agreement, every SOW and every amendment in one place, with the end dates of fixed‑term SOWs.

How Mellow Handles Contractor Agreements

Every new country adds its own contract. Each country has its own rules on contractor status, taxes and the transfer of rights, and IP transfer is where small differences in wording matter most. A missing period, territory or signature can leave the rights with the contractor and turn into a dispute months later. With contractors in five or ten countries, keeping every agreement correct and up to date becomes a job of its own.

Mellow’s Contractor of Record takes this work off your team. You sign one agreement with Mellow, which includes the transfer of rights to the results and an NDA. Mellow then signs its own agreement with each of your contractors. All of these agreements are legally reviewed and 100% compliant with the laws of the contractor’s country, so you do not have to draft a new contract for every country.

What this looks like in practice:

  • One agreement instead of one per country. You work with contractors in 100+ countries under a single agreement with Mellow.
  • Rights and confidentiality from day one. The transfer of rights to the results and the NDA are part of your agreement with Mellow and of Mellow’s agreement with each contractor.
  • Tax forms at onboarding. Mellow collects and checks W‑9 and W‑8 forms when a contractor joins.
  • Payment after acceptance. You pay for work after you accept it.
  • Closing documents every month for you and your contractors.
  • Help with disputes. If a disagreement with a contractor comes up, Mellow acts as a mediator between you and the contractor.
  • Proactive live support for you and your contractors.

Book a call with our team to get answers to all your questions about working with contractors.

Back to articles